R4903, 0.1 CFM Analog Interface (0.3 & 0.5 μm)

2086897-01


Part of the MET ONE Facility Monitoring System. R4903, 0.1 CFM (0.3 & 0.5 μm)
 

Especificaciones

Platform APC Instruments
Coincidence Loss 5% at 70,630,000 particles/m3
Interfaces & Protocols Analog 4-20 mA, Serial RS485
Zero Count Not more than one count in 20 minutes
Count Alarms, Display & Cycles User-defined alarm counts displayed via LED on box or remote LED
Environmental Conditions Indoor Environment
Temperature Range Operating temperature range: 12°C to 29°C, Storage temperature range: -40 to +70°C
Power Requirements 6 VDC +/- 10%, 125 mA
Weight 0.30|kg / 0.661386786554633|lb
Width 9.40|cm / 3.7007874015748|in
Depth 3.80|cm / 1.49606299212598|in
Height 6.00|cm / 2.36220472440945|in
Color Silver

Notas de la aplicación

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.